Sports Equipment

Products

Integral Skin Foams

Solvent based

Integral Skin Foams
CodePropertiesNotesData sheet
Klease 02 1580semi-matt finishing. Excellent release and superficial aspect. Low build-updirect finishing without IMC
Klease 02 3800 Semi-glossy finishing, low build up. Good pattern sharpness Direct finishing without IMC
Klease 0B 3100Glossy finishing, low build up. Good pattern sharpness. Direct finishing without IMC
Klease 0A 2800 Very high mould structure sharpness, for embossed and skin effects.To be used with IMC
Klease 0B 0800semi-matt finishing when used without IMC. Superficial uniformity and definition, excellent releaseto be used with or without IMC
Klease 0B 3400 Semi-matt finishing. Very high mould structure sharpness, for embossed and skin effects. To be used with or without IMC
Release agents for armrests, headrests, saddles, steering wheels, sport equipments production. Products available in various concentrations and different solvent grades, depending on moulding process conditions.

Water Based

Integral Skin Foams
CodePropertiesNotesData sheet
Ecolease 02 3580matt, uniform finishing. Good release and limited build-up. Totally solvent-freeto be used with or without IMC Mould temperature > 50°C
Ecolease 0A 4120semi-matt finishing, low build-up, superficial uniformity. Totally solvent-freeto be used with or without IMC Mould temperature > 50°C
Release agent for armrests, headrests, saddles, steering wheels, sport equipments production.

Cold Cure Flexible Foams

Solvent Based

Cold Cure Flexible Foams
CodePropertiesNotesData sheet
Klease 03 6600To be applied on moulds at 40-45°C. Half hard film. For MDI/TDI - TDI systems.
Klease 03 2250 To be applied on moulds at 40-60°C. Open cells finishing . For MDI based systems. Half hard film.
Klease 03 4040mould temperature 45/65 °C. medium film, good release and slipperiness, low build-upMDI e MDI/TDI systems
Klease 03 4850mould temperature 40/50 °C. Medium, flexible film, low build-up. Superficial soft handMDI e MDI/TDI systems
Klease 03 2160To be applied on moulds at 40-60°C. For MDI/TDI - TDI based systems.Concentrated product, to be diluted with solvent. Compatible with various density foams.
Klease 03 2222Lubricant for PU
Release agents for car and motor bike seats, headrest, armrests, padding production. Products available in various concentrations and different solvent grades, depending on moulding process conditions.

Water Based

Cold Cure Flexible Foams
CodePropertiesNotesData sheet
Ecolease 03 0680excellent release and slipperiness of the parts. Semi-closed surface, soft and dry hand. Totally solvent-freemould temperature > 50°C. pre-treatment with KEMI 76 1500 recommended. MDI and MDI/TDI systems
Ecolease 03 1780excellent release and slipperiness of the parts, soft hand. Totally solvent-freemould temperature > 50°C. pre-treatment with KEMI 76 1500 recommended. MDI and MDI/TDI systems
Release agents for car and motor bike seats, headrests, armrests, padding production.

Rigid – RIM / RRIM Foams

Solvent Based

Rigid - RIM / RRIM Foams
CodePropertiesNotesData sheet
Klease 05 1020product for high density and for RIM/RRIM. Medium film, good definition of the surface. Glossy finishingpickling necessary for overpainting
Klease 05 0310product for high density and for RIM/RRIM. Medium film, good definition of the surface. Glossy finishingpickling necessary for overpainting
Klease 0D 1000waxy paste to be applied with a cloth or brush. For rigid low/medium densitysilicone-free product
Klease 0C 5030For low density foams. Soft film, low build up. Silicone free
Klease 0C 6900medium waxy film, for medium/low density. Excellent release, good surface definitionsilicone-free product
Release agents for sandwich panels, funeral wreaths, insulation, woodgrain, car spoilers, bumpers and interior doors, high structural strength parts. Products available in various concentrations and different solvent grades, depending on moulding process conditions.

Water Based

Rigid - RIM / RRIM Foams
CodePropertiesNotesData sheet
Ecolease 0C 2960Totally solvent-free syntetic polymers emulsion, excellent release, suitable for medium/low density.mould temperature > 50 °C
Release agents for sandwich panels, funeral wreaths, insulation, woodgrain, car spoilers, bumpers and interior doors, high structural strength parts.

Semirigid Foams

Solvent Based

Semirigid Foams
CodePropertiesNotesData sheet
Klease 06 3310Soft film, high slipperiness.
Release agents for dashboards, schock absorbers, car under-carpets, sound insulation productions. Products available in various concentartions and different solvent grades, depending on moulding process conditions.

Water Based

Semirigid Foams
CodePropertiesNotesData sheet
Ecolease 06 3270Soft film, good slipperiness.To be applied on moulds at temperature > 50°C.
Release agents for dashboards, schock absorbers, car under-carpets, sound insulation productions.

Elastomers

Solvent Based

Elastomers
CodePropertiesNotesData sheet
Klease 07 1020Glossy finishing. Half hard, slippery and protective film.
Klease 07 2000Glossy finishing. Soft film, high temperature resistance.
Release agents for cart wheels, rollers, sheets production. Products available in various concentrations and different solvent grades, depending on moulding process conditions.

Water Based

Elastomers
CodePropertiesNotesData sheet
Ecolease 07 2620Glossy finishing, hard film. Low build up and high slipperiness.To be applied on moulds at temperature > 50°C.
Release agents for cart wheels, rollers, sheets production.

Viscoelastic Foams

Solvent Based

Viscoelastic Foams
CodePropertiesNotesData sheet
Klease 08 1500waxy paste to be applied with a cloth or brush. Medium film with excellent extraction and release capabilitiesmould temperature 40/45 °C. MDI e MDI/TDI systems
Klease 08 6600To be applied on moulds at 40-45°C. Half hard film. For MDI/TDI - TDI systems.
Release agent for pillows, mattresses, padding production. Products available in various concentrations and different solvent grades, depending on moulding process conditions.

Water Based

Viscoelastic Foams
CodePropertiesNotesData sheet
Ecolease 08 0280emulsion of synthetic polymers; high release and slipperiness, dry handmould temperature > 50°C. MDI e MDI/TDI systems
Ecolease 08 2960 High slipperiness and low build up. For MDI/TDI - TDI systems.To be applied on moulds at temperature > 50°C.
Release agent for pillows, mattresses, padding production.

Car Filters

Solvent Based

Car Filters
CodePropertiesNotesData Sheet
Klease 09 2770Per blown systems. Semi-matt finishing.
Klease 09 1530for compact systems. Glossy finishing.
Release agents for automotive filters production. Products available in various concentrations and different solvent grades, depending on moulding process conditions.

PU / PU Dual-Density Soles

Solvent Base

PU / PU Dual-Density Soles
CodePropertiesNotesData Sheet
Klease 12 2890Rubber-like effect, low build up. Excellent adhesion midsole/outsole.
Klease 12 2950matt finishing and dry touch; excellent adhesion between outsole and midsole
Klease 12 8270semi-matt uniform finishing, excellent release and adhesion between outsole and midsole
Klease 12 8310Semi-glossy finishing, low build up. Excellent adhesion midsole/outsole.
Release agents for sport, boots and safety shoes dual-density production. Products available in various concentrations and different solvent grades, depending on moulding process conditions.

PU / TPU or PU / Rubber Dual-Density Soles

Solvent Base

PU / TPU or PU / Rubber Dual-Density Soles
CodePropertiesNotesData Sheet
Klease 13 0770soft hand, rubber-like effect, matt finishing, high release and lubrication grade
Klease 13 2890matt, uniform finishing, low build-up
Release agents for sport, boots and safety shoes dual-density production. Products available in various concentrations and different solvent grades, depending on moulding process conditions.

Fussbett – Insoles

Solvent Based

Fussbett - Insoles
CodePropertiesNotesData Sheet
Klease 16 0470Hard film, high slipperiness. To be applied on moulds at 35-40°C.
Klease 16 0850hard film, excellent release with limited build-up
Klease 16 3610excellent release and lubrication, tin-free
Klease 16 4790semi-matt finishing
Release agent for insoles production. Products available in various concentrations and different solvent grades, depending on moulding process conditions.

O-Ring and Technical Moulding

Solvent Based

O-Ring and Technical Moulding
CodePropertiesNotesData sheet
Klube 27 1750Semi-permanent product,excellent release properties.Suitable for metal-rubber adhesion.
Release agents for gaskets and technical moulding production.

Water Based

O-Ring and Technical Moulding
CodePropertiesNotesData sheet
Aqualube 27 3500 General use, no suitable for silicone rubber. To be diluted before use for compression moulding.
Aqualube 27 2660Fluoropolymers emulsion, suitable also for silicone rubber. Thermal stability up to 200°C.Silicone fluids free, suitable for metal/rubber adhesion. To be diluted before use for compression moulding.
Aqualube 27 7140Polymers emulsion, high release and thermal stability power. For rubber flooring and recycled rubber.
Aqualube 27 3370Excellent release power, inert film. High thermal stability. Multi-release properties, no transfer contamination. For compression moulding, silicone fluids free.
Release agents for gaskets and technical moulding production.

Shoe Soles

Water Based

Shoe Soles
CodePropertiesNotesData sheet
Aqualube 29 1370Modified silicone emulsion, high lubricant and release power.. No suitable for silicone rubber. Moulding temperature 200-220°C.High performance in compression moulding. To be diluted before use.
Aqualube 29 3500rubber soles mould release agentsexcellent release properties with low build-up. Glossy finishing
Release agent for rubber shoe soles moulding.

EVA

Water Based

EVA
CodePropertiesNotesData sheet
Aqualube 28 1230Semi-glossy finishing, very high release power. To be diluted before use, and applied on moulds at >50°C. Deeply clean moulded pieces before post-treatment processes.
Aqualube 28 2980Semi-glossy finishing, very high release power. To be diluted before use, and applied on moulds at >50°C. Deeply clean moulded pieces before post-treatment processes.
Release agents for soles, midsoles and artifacts moulding.

Die Casting

Water Based

Die Casting
CodiceCaratteristicheNoteScheda tecnica
Kcast 41 1120Excellent antioxidant and anticorrosive properties; very high flowage and release power.General use. To be diluited before use, up to 1 ÷ 170.
Kcast 41 0230Excellent antioxidant and anticorrosive properties; surface micro-porosity reduction. Specific for very high quality pieces production.To be diluited before use, up to 1 ÷ 200.
Release agents for aluminum die casting.

Polyesters

Solvent Based

Polyesters
CodiceCaratteristicheNoteScheda tecnica
Kharz 52 1390 this release agent creates an insulating film between the item and the mould, providing excellent release while protecting the mould from styreneapplicable on metal moulds, resin, plaster, etc.
Kharz 52 1880Moulde pieces can be post-treated without cleaning.Multi-release properties. Suitable eiher for resin or metal moulds.
Kharz 52 6600waxy, hard and resistant film. Excellent release, low build-up suitable for fiberglass reinforced resin, large moulds
Release agents for gel-coats, filled/reinforced polyester resins moulding.

Water Based

Polyesters
CodePropertiesNotesData sheet
Kharz 52 8340Release driving by formation of a consistent and insulating film between mould and resin.Suitable for different mould types: polyester, gypsum, metal mades.
Release agents for gel-coats, filled/reinforced polyester resins moulding.

Epoxies

Solvent Based

Epoxies
CodePropertiesNotesData sheet
Kharz 53 0630 waxy paste, with ultra-glossy finishingallows multiple releases according to the mould and type of resin
Kharz 53 1900 waxy medium-hard film, with low build-up
Kharz 53 1990Hard and tough film, Very high release and slippery power.Silicone based product: deeply clean moulded pieces by solvents or sandblasting, before post-treatment processes.
Release agents for electronic and electrotechnical pieces moulding.

Tyres – Bladder Treatment

Water Based

Tyres - Bladder Treatment
CodePropertiesNotesData sheet
Rubber lube 61 4420water-based product to be applied either directly on the bladder or inside the tyre to be transfered on the bladderallows multiple releases while increases the bladder durability over the time
Products for lubricant and semi-permanent bladder treatment.

Tyres – Internal Paints

Water Based

Tyres - Internal Paints
CodePropertiesNotesData sheet
Rubber lube 62 3070Water based product. Very good bladder slippery and conformation into tyre, and air removal from mould.Excellent lubricant properties and low tyres production defetcs. Available in black version also.
Rubber lube 62 3970black version of Rubber lube 62 3070; same technical features
Internal release agents for tyres moulding.

Tyres – External Paint

Water Based

Tyres - External Paint
CodePropertiesNotesData sheet
Rubber lube 63 0300Water based product. Colour uniformity between tyre tread and wall, kept after aging processes.Air removal from mould improvement, low build up.
External release agents for tyres moulding.

Tyres – Cutting Machines Lubricants

Water Based

Tyres - Cutting Machines Lubricants
CodePropertiesNotesData sheet
Rubber lube 64 4490to be applied on manual and automatic cutting systems decrease of rubbing forces and heat development. Silicone free
Lubricant for tyres refinishing.

Tyres – Tread Moulding

Water Based

Tyres - Tread Moulding
CodePropertiesNotesData sheet
Rubber lube 65 3370Water based, semi-permanent; high lucricant power and low tyres production defects.Inert and thermally stable film. No transfer on moulded pieces.
Release agents for tyre treads moulding.

Tyres – Touch Up

Water Based

Tyres - Touch Up
CodePropertiesNotesData sheet
Rubber lube 66 2690Water based black coating, fast drying at room temperature.Very god adhesion on tyre. Elastic, tough and uniform film.
Coatings for external tyre aesthetic refinishing.

Tyres – Batch Off

Water Based

Tyres - Batch Off
CodePropertiesNotesData sheet
Rubber lube 68 7540Fatty acid salts water solution, easy to be added. High wetting power, suitable for various rubber blends. 100% biodegradable. Antifoam use advised
Rubber lube 68 5650Water based anti-adhesive, with high percentage of mineral fillers.Suitable for rubber blends particularly sticky. Antifoam use advised
Anti-adhesives for green rubber blends production; suitable for automatic dosage. High concentration products, to be diluted gently stirring.

Antifoams

Water Based

Antifoams
CodePropertiesNotesData sheet
Kemi 71 8600Non-siliconic antifoam additive for water based systems.Stable in acid and moderate alcaline conditions. Easy water dispersible.
Kemi 71 0510non-siliconic, foam formation reduction in several water-based applications easily water soluble

Mould Cleaners

Solvent Based

Mould Cleaners
CodePropertiesNotesData sheet
Kemi 72 0730suitable for cleansing encrusted moulds and metallic parts in generalsuggested working temperature: 60 - 70°C
Kemi 72 7170Specific product for moulds cleaning.General use.
Kemi 72 0020Specific product for moulds cleaning.High cleaning power.
Kemi 72 1450Suitable for release agents residuals removing from moulds and tools, as spray guns and tanks.High cleaning power.

Antistatics

Antistatics
CodePropertiesNotesData sheet
Kemi 74 0331Additive suitable for conductivity increase, general use. To be used at 2-3 % on polymer amount basis.

Mixing Heads Cleaners

Solvent Based

Mixing Heads Cleaners
CodePropertiesNoteaData sheet
Kemi 75 0030For mixing heads, tanks and input pipes cleaning of PU moulding machineries.High cleaning power.
Kemi 75 1070 suitable for cleansing moulds and mixing headssuggested working temperature: 60 - 80°C
Kemi 75 2300For mixing heads, tanks and input pipes cleaning of PU moulding machineries.Low toxicological impact product.

Moulds Pre-Treatment Pastes

Solvent Based

Moulds Pre-Treatment Pastes
CodePropertiesNotesData sheet
Kemi 76 1500Correctly applied, the product leaves a compact film on new or old cleaned moulds, improving folowing moulding cycles.Brush or wiping application.

Moulds Pre-Treatment Pastes

Solvent Based

Moulds Pre-Treatment Pastes
CodePropertiesNotesData sheet
Kemi 76 1500Correctly applied, the product leaves a compact film on new or old cleaned moulds, improving folowing moulding cycles.Brush or wiping application.

UV Filters

UV Filters
CodePropertiesNotesData sheet
Kemi 79 0490Reduction of PU color variation, caused by sunbeams exposure. Dosage depending on colour shade and light protection level required.

Liquid Colour Pastes

Liquid Colour Pastes
CodePropertiesNotesData sheet
KchromeAvailable in traditional and special carriers; wide range of compatibility and viscosity, for any application system.Wide colour chart, Ral, Pantone and customized references.High UV and aging resistance special systems.