Products

Cold Cure Flexible Foams

Solvent Based

Cold Cure Flexible Foams
CodePropertiesNotesData sheet
Klease 03 6600To be applied on moulds at 40-45°C. Half hard film. For MDI/TDI - TDI systems.
Klease 03 2250 To be applied on moulds at 40-60°C. Open cells finishing . For MDI based systems. Half hard film.
Klease 03 4040mould temperature 45/65 °C. medium film, good release and slipperiness, low build-upMDI e MDI/TDI systems
Klease 03 4850mould temperature 40/50 °C. Medium, flexible film, low build-up. Superficial soft handMDI e MDI/TDI systems
Klease 03 2160To be applied on moulds at 40-60°C. For MDI/TDI - TDI based systems.Concentrated product, to be diluted with solvent. Compatible with various density foams.
Klease 03 2222Lubricant for PU
Release agents for car and motor bike seats, headrest, armrests, padding production. Products available in various concentrations and different solvent grades, depending on moulding process conditions.

Water Based

Cold Cure Flexible Foams
CodePropertiesNotesData sheet
Ecolease 03 0680excellent release and slipperiness of the parts. Semi-closed surface, soft and dry hand. Totally solvent-freemould temperature > 50°C. pre-treatment with KEMI 76 1500 recommended. MDI and MDI/TDI systems
Ecolease 03 1780excellent release and slipperiness of the parts, soft hand. Totally solvent-freemould temperature > 50°C. pre-treatment with KEMI 76 1500 recommended. MDI and MDI/TDI systems
Release agents for car and motor bike seats, headrests, armrests, padding production.

Viscoelastic Foams

Solvent Based

Viscoelastic Foams
CodePropertiesNotesData sheet
Klease 08 1500waxy paste to be applied with a cloth or brush. Medium film with excellent extraction and release capabilitiesmould temperature 40/45 °C. MDI e MDI/TDI systems
Klease 08 6600To be applied on moulds at 40-45°C. Half hard film. For MDI/TDI - TDI systems.
Release agent for pillows, mattresses, padding production. Products available in various concentrations and different solvent grades, depending on moulding process conditions.

Water Based

Viscoelastic Foams
CodePropertiesNotesData sheet
Ecolease 08 0280emulsion of synthetic polymers; high release and slipperiness, dry handmould temperature > 50°C. MDI e MDI/TDI systems
Ecolease 08 2960 High slipperiness and low build up. For MDI/TDI - TDI systems.To be applied on moulds at temperature > 50°C.
Release agent for pillows, mattresses, padding production.