| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Klease 01 1500 | Waxy paste suitable either for room or high temperature processes. | Foam sliding improvement; very high release properties | |
| Release agent for flexible and rigid block foaming, for furniture and constructions industries. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Klease 02 1580 | semi-matt finishing. Excellent release and superficial aspect. Low build-up | direct finishing without IMC | |
| Klease 02 3800 | Semi-glossy finishing, low build up. Good pattern sharpness | Direct finishing without IMC | |
| Klease 0B 3100 | Glossy finishing, low build up. Good pattern sharpness. | Direct finishing without IMC | |
| Klease 0A 2800 | Very high mould structure sharpness, for embossed and skin effects. | To be used with IMC | |
| Klease 0B 0800 | semi-matt finishing when used without IMC. Superficial uniformity and definition, excellent release | to be used with or without IMC | |
| Klease 0B 3400 | Semi-matt finishing. Very high mould structure sharpness, for embossed and skin effects. | To be used with or without IMC | |
| Release agents for armrests, headrests, saddles, steering wheels, sport equipments production. Products available in various concentrations and different solvent grades, depending on moulding process conditions. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Ecolease 02 3580 | matt, uniform finishing. Good release and limited build-up. Totally solvent-free | to be used with or without IMC Mould temperature > 50°C | |
| Ecolease 0A 4120 | semi-matt finishing, low build-up, superficial uniformity. Totally solvent-free | to be used with or without IMC Mould temperature > 50°C | |
| Release agent for armrests, headrests, saddles, steering wheels, sport equipments production. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Klease 03 6600 | To be applied on moulds at 40-45°C. Half hard film. For MDI/TDI - TDI systems. | ||
| Klease 03 2250 | To be applied on moulds at 40-60°C. Open cells finishing . For MDI based systems. Half hard film. | ||
| Klease 03 4040 | mould temperature 45/65 °C. medium film, good release and slipperiness, low build-up | MDI e MDI/TDI systems | |
| Klease 03 4850 | mould temperature 40/50 °C. Medium, flexible film, low build-up. Superficial soft hand | MDI e MDI/TDI systems | |
| Klease 03 2160 | To be applied on moulds at 40-60°C. For MDI/TDI - TDI based systems. | Concentrated product, to be diluted with solvent. Compatible with various density foams. | |
| Klease 03 2222 | Lubricant for PU | ||
| Release agents for car and motor bike seats, headrest, armrests, padding production. Products available in various concentrations and different solvent grades, depending on moulding process conditions. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Ecolease 03 0680 | excellent release and slipperiness of the parts. Semi-closed surface, soft and dry hand. Totally solvent-free | mould temperature > 50°C. pre-treatment with KEMI 76 1500 recommended. MDI and MDI/TDI systems | |
| Ecolease 03 1780 | excellent release and slipperiness of the parts, soft hand. Totally solvent-free | mould temperature > 50°C. pre-treatment with KEMI 76 1500 recommended. MDI and MDI/TDI systems | |
| Release agents for car and motor bike seats, headrests, armrests, padding production. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Ecolease 04 1400 | High temperature oxidation fastness. To be applied on moulds at 85-100°C | Concentrated product,to be diluted at use. | |
| Ecolease 04 1430 | Anti-noise component to be used with 04 1400 | Reduction of rubbing noise between seats and inserts. | |
| Release agent for car seats production. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Klease 05 1020 | product for high density and for RIM/RRIM. Medium film, good definition of the surface. Glossy finishing | pickling necessary for overpainting | |
| Klease 05 0310 | product for high density and for RIM/RRIM. Medium film, good definition of the surface. Glossy finishing | pickling necessary for overpainting | |
| Klease 0D 1000 | waxy paste to be applied with a cloth or brush. For rigid low/medium density | silicone-free product | |
| Klease 0C 5030 | For low density foams. Soft film, low build up. | Silicone free | |
| Klease 0C 6900 | medium waxy film, for medium/low density. Excellent release, good surface definition | silicone-free product | |
| Release agents for sandwich panels, funeral wreaths, insulation, woodgrain, car spoilers, bumpers and interior doors, high structural strength parts. Products available in various concentrations and different solvent grades, depending on moulding process conditions. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Ecolease 0C 2960 | Totally solvent-free syntetic polymers emulsion, excellent release, suitable for medium/low density. | mould temperature > 50 °C | |
| Release agents for sandwich panels, funeral wreaths, insulation, woodgrain, car spoilers, bumpers and interior doors, high structural strength parts. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Klease 06 3310 | Soft film, high slipperiness. | ||
| Release agents for dashboards, schock absorbers, car under-carpets, sound insulation productions. Products available in various concentartions and different solvent grades, depending on moulding process conditions. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Ecolease 06 3270 | Soft film, good slipperiness. | To be applied on moulds at temperature > 50°C. | |
| Release agents for dashboards, schock absorbers, car under-carpets, sound insulation productions. | |||
| Code | Properties | Notes | Data Sheet |
|---|---|---|---|
| Klease 09 2770 | Per blown systems. Semi-matt finishing. | ||
| Klease 09 1530 | for compact systems. Glossy finishing. | ||
| Release agents for automotive filters production. Products available in various concentrations and different solvent grades, depending on moulding process conditions. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Aqualube 21 7540 | Fatty acid salts water solution, easy to be added. High wetting power, suitable for various rubber blends. 100% biodegradable. | Antifoam use advised | |
| Aqualube 21 5650 | Water based anti-adhesive, with high percentage of mineral fillers.Suitable for rubber blends particularly sticky. | Antifoam use advised | |
| Anti-adhesives for green rubber blends production; suitable for automatic dosage. High concentration products, to be diluted gently stirring. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Klube 22 1350 | For PP,PE,NYLON,EPDM made flexible mandrels, whatever lenght. No release contamination into hoses after process. | Film resistant to abrasion and high temperature. | |
| Klube 23 1350 | for rigid mandrels, whatever length | High temperature and abrasion resisting film. No residual parts left in the hose. | |
| Klube 23 2640 | For rigid mandrels, more than 40 mt lenght. | Film resistant to abrasion and high temperature. | |
| Klube 23 2700 | For rigid mandrels, less than 40 mt lenght. | Film resistant to abrasion and high temperature. | |
| Release agents for brake and power steering hoses, industrial hoses for fluids, chemical products, gas and vapours, mineral oils and gasoline transfer. Hydraulics high pressure hoses, industrial and agricultural sectors. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Aqualube 22 1380 | product for flexible mandrels in PP, PE, NYLON, EPDM | green rubber anti-adhesive for the production of hoses on flexible mandrels | |
| Aqualube 22 2400 | For PP,PE,NYLON,EPDM made mandrels. | PDMS free. Film resistant to abrasion and high temperature. | |
| Aqualube 22 5740 | product for flexible mandrels in PP, PE, NYLON, EPDM | polymeric based release agent, for industrial hoses on flexible mandrel. High release and slide capability. No residual left. | |
| Aqualube 23 5400 | for rigid mandrels, less than 40 mt length | release agent for industrial hoses on rigid mandrel. Specific for silicone rubber | |
| Aqualube 23 5740 | for rigid mandrels, more than 40 mt length | polymeric based release agent, for industrial hoses on flexible mandrel. High release and slide capability. No residual left. | |
| Release agents for brake and power steering hoses, industrial hoses for fluids, chemical products, gas and vapours, mineral oils and gasoline transfer. Hydraulics high pressure hoses, industrial and agricultural sectors. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Aqualube 24 1100 | High resistance to thermal degradation. Excellent slippery power, suitable for items with elaborated structure. | Silicone fluids free, fully water soluble. | |
| Aqualube 24 4140 | ready to used product suitable for any kind of EPDM, VAMAC, silicone and fluorinated rubber compounds | Totally water soluble, high biodegradability | |
| Aqualube 24 5050 | High viscosity, ready-to-use, for complex shaped hoses in EPDM and VAMAC | Totally water soluble | |
| Release agents for shaped hoses production, by general/special rubber blends. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Klube 25 1130 | semipermanent release agent for Poly-V transmission belts | no release agent transfer on the molded parts | |
| Release agent for POLI-V driving belts production. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Aqualube 25 1520 | Synthetic polymers enulsion, high lubricant power and thermal stability. | To be diluted before use. Low oxidation rate, at high temperture too. | |
| Aqualube 25 5450 | for transmission belts, with teflon or aramidic weaving | high lubricant capability and low build-up | |
| Release agent for driving belts production in general. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Klube 27 1750 | Semi-permanent product,excellent release properties. | Suitable for metal-rubber adhesion. | |
| Release agents for gaskets and technical moulding production. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Aqualube 27 3500 | General use, no suitable for silicone rubber. | To be diluted before use for compression moulding. | |
| Aqualube 27 2660 | Fluoropolymers emulsion, suitable also for silicone rubber. Thermal stability up to 200°C. | Silicone fluids free, suitable for metal/rubber adhesion. To be diluted before use for compression moulding. | |
| Aqualube 27 7140 | Polymers emulsion, high release and thermal stability power. | For rubber flooring and recycled rubber. | |
| Aqualube 27 3370 | Excellent release power, inert film. High thermal stability. | Multi-release properties, no transfer contamination. For compression moulding, silicone fluids free. | |
| Release agents for gaskets and technical moulding production. | |||
| Codice | Caratteristiche | Note | Scheda tecnica |
|---|---|---|---|
| Kcast 41 1120 | Excellent antioxidant and anticorrosive properties; very high flowage and release power.General use. | To be diluited before use, up to 1 ÷ 170. | |
| Kcast 41 0230 | Excellent antioxidant and anticorrosive properties; surface micro-porosity reduction. Specific for very high quality pieces production. | To be diluited before use, up to 1 ÷ 200. | |
| Release agents for aluminum die casting. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Kharz 51 7140 | Excellent release power and low build up. | Mutli-release properties. Available in various concentrations. | |
| Release agents for door panels, sound insulation production, made by synthetic/natural fibers-reinforced phenolic resins moulding. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Kemi 71 8600 | Non-siliconic antifoam additive for water based systems. | Stable in acid and moderate alcaline conditions. Easy water dispersible. | |
| Kemi 71 0510 | non-siliconic, foam formation reduction in several water-based applications | easily water soluble | |
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Kemi 72 0730 | suitable for cleansing encrusted moulds and metallic parts in general | suggested working temperature: 60 - 70°C | |
| Kemi 72 7170 | Specific product for moulds cleaning. | General use. | |
| Kemi 72 0020 | Specific product for moulds cleaning. | High cleaning power. | |
| Kemi 72 1450 | Suitable for release agents residuals removing from moulds and tools, as spray guns and tanks. | High cleaning power. | |
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Kemi 74 0331 | Additive suitable for conductivity increase, general use. | To be used at 2-3 % on polymer amount basis. | |
| Code | Properties | Notea | Data sheet |
|---|---|---|---|
| Kemi 75 0030 | For mixing heads, tanks and input pipes cleaning of PU moulding machineries. | High cleaning power. | |
| Kemi 75 1070 | suitable for cleansing moulds and mixing heads | suggested working temperature: 60 - 80°C | |
| Kemi 75 2300 | For mixing heads, tanks and input pipes cleaning of PU moulding machineries. | Low toxicological impact product. | |
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Kemi 76 1500 | Correctly applied, the product leaves a compact film on new or old cleaned moulds, improving folowing moulding cycles. | Brush or wiping application. | |
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Kemi 76 1500 | Correctly applied, the product leaves a compact film on new or old cleaned moulds, improving folowing moulding cycles. | Brush or wiping application. | |
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Kemi 79 0490 | Reduction of PU color variation, caused by sunbeams exposure. | Dosage depending on colour shade and light protection level required. | |
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Kemi 78 1730 | additive for high gloss soles production | suitable for solvent-based products | |
| Kemi 78 4980 | additive employed to modify the moulded items' superficial aspect | suitable for solvent-based products | |
| Kemi 78 0960 | additive employed to modify the moulded items' superficial aspect | suitable for water-based products | |
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Kemi 7C 1430 | polymeric emulsion having anti-noise affection on polyurethane parts. Excellent sliding | ||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Kchrome | Available in traditional and special carriers; wide range of compatibility and viscosity, for any application system. | Wide colour chart, Ral, Pantone and customized references.High UV and aging resistance special systems. | |