| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Klease 01 1500 | Waxy paste suitable either for room or high temperature processes. | Foam sliding improvement; very high release properties | |
| Release agent for flexible and rigid block foaming, for furniture and constructions industries. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Klease 02 1580 | semi-matt finishing. Excellent release and superficial aspect. Low build-up | direct finishing without IMC | |
| Klease 02 3800 | Semi-glossy finishing, low build up. Good pattern sharpness | Direct finishing without IMC | |
| Klease 0B 3100 | Glossy finishing, low build up. Good pattern sharpness. | Direct finishing without IMC | |
| Klease 0A 2800 | Very high mould structure sharpness, for embossed and skin effects. | To be used with IMC | |
| Klease 0B 0800 | semi-matt finishing when used without IMC. Superficial uniformity and definition, excellent release | to be used with or without IMC | |
| Klease 0B 3400 | Semi-matt finishing. Very high mould structure sharpness, for embossed and skin effects. | To be used with or without IMC | |
| Release agents for armrests, headrests, saddles, steering wheels, sport equipments production. Products available in various concentrations and different solvent grades, depending on moulding process conditions. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Ecolease 02 3580 | matt, uniform finishing. Good release and limited build-up. Totally solvent-free | to be used with or without IMC Mould temperature > 50°C | |
| Ecolease 0A 4120 | semi-matt finishing, low build-up, superficial uniformity. Totally solvent-free | to be used with or without IMC Mould temperature > 50°C | |
| Release agent for armrests, headrests, saddles, steering wheels, sport equipments production. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Klease 03 6600 | To be applied on moulds at 40-45°C. Half hard film. For MDI/TDI - TDI systems. | ||
| Klease 03 2250 | To be applied on moulds at 40-60°C. Open cells finishing . For MDI based systems. Half hard film. | ||
| Klease 03 4040 | mould temperature 45/65 °C. medium film, good release and slipperiness, low build-up | MDI e MDI/TDI systems | |
| Klease 03 4850 | mould temperature 40/50 °C. Medium, flexible film, low build-up. Superficial soft hand | MDI e MDI/TDI systems | |
| Klease 03 2160 | To be applied on moulds at 40-60°C. For MDI/TDI - TDI based systems. | Concentrated product, to be diluted with solvent. Compatible with various density foams. | |
| Klease 03 2222 | Lubricant for PU | ||
| Release agents for car and motor bike seats, headrest, armrests, padding production. Products available in various concentrations and different solvent grades, depending on moulding process conditions. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Ecolease 03 0680 | excellent release and slipperiness of the parts. Semi-closed surface, soft and dry hand. Totally solvent-free | mould temperature > 50°C. pre-treatment with KEMI 76 1500 recommended. MDI and MDI/TDI systems | |
| Ecolease 03 1780 | excellent release and slipperiness of the parts, soft hand. Totally solvent-free | mould temperature > 50°C. pre-treatment with KEMI 76 1500 recommended. MDI and MDI/TDI systems | |
| Release agents for car and motor bike seats, headrests, armrests, padding production. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Ecolease 04 1400 | High temperature oxidation fastness. To be applied on moulds at 85-100°C | Concentrated product,to be diluted at use. | |
| Ecolease 04 1430 | Anti-noise component to be used with 04 1400 | Reduction of rubbing noise between seats and inserts. | |
| Release agent for car seats production. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Klease 05 1020 | product for high density and for RIM/RRIM. Medium film, good definition of the surface. Glossy finishing | pickling necessary for overpainting | |
| Klease 05 0310 | product for high density and for RIM/RRIM. Medium film, good definition of the surface. Glossy finishing | pickling necessary for overpainting | |
| Klease 0D 1000 | waxy paste to be applied with a cloth or brush. For rigid low/medium density | silicone-free product | |
| Klease 0C 5030 | For low density foams. Soft film, low build up. | Silicone free | |
| Klease 0C 6900 | medium waxy film, for medium/low density. Excellent release, good surface definition | silicone-free product | |
| Release agents for sandwich panels, funeral wreaths, insulation, woodgrain, car spoilers, bumpers and interior doors, high structural strength parts. Products available in various concentrations and different solvent grades, depending on moulding process conditions. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Ecolease 0C 2960 | Totally solvent-free syntetic polymers emulsion, excellent release, suitable for medium/low density. | mould temperature > 50 °C | |
| Release agents for sandwich panels, funeral wreaths, insulation, woodgrain, car spoilers, bumpers and interior doors, high structural strength parts. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Klease 06 3310 | Soft film, high slipperiness. | ||
| Release agents for dashboards, schock absorbers, car under-carpets, sound insulation productions. Products available in various concentartions and different solvent grades, depending on moulding process conditions. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Ecolease 06 3270 | Soft film, good slipperiness. | To be applied on moulds at temperature > 50°C. | |
| Release agents for dashboards, schock absorbers, car under-carpets, sound insulation productions. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Klease 07 1020 | Glossy finishing. Half hard, slippery and protective film. | ||
| Klease 07 2000 | Glossy finishing. Soft film, high temperature resistance. | ||
| Release agents for cart wheels, rollers, sheets production. Products available in various concentrations and different solvent grades, depending on moulding process conditions. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Ecolease 07 2620 | Glossy finishing, hard film. Low build up and high slipperiness. | To be applied on moulds at temperature > 50°C. | |
| Release agents for cart wheels, rollers, sheets production. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Klease 08 1500 | waxy paste to be applied with a cloth or brush. Medium film with excellent extraction and release capabilities | mould temperature 40/45 °C. MDI e MDI/TDI systems | |
| Klease 08 6600 | To be applied on moulds at 40-45°C. Half hard film. For MDI/TDI - TDI systems. | ||
| Release agent for pillows, mattresses, padding production. Products available in various concentrations and different solvent grades, depending on moulding process conditions. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Ecolease 08 0280 | emulsion of synthetic polymers; high release and slipperiness, dry hand | mould temperature > 50°C. MDI e MDI/TDI systems | |
| Ecolease 08 2960 | High slipperiness and low build up. For MDI/TDI - TDI systems. | To be applied on moulds at temperature > 50°C. | |
| Release agent for pillows, mattresses, padding production. | |||
| Code | Properties | Notes | Data Sheet |
|---|---|---|---|
| Klease 09 2770 | Per blown systems. Semi-matt finishing. | ||
| Klease 09 1530 | for compact systems. Glossy finishing. | ||
| Release agents for automotive filters production. Products available in various concentrations and different solvent grades, depending on moulding process conditions. | |||
| Code | Properties | Notes | Data Sheet |
|---|---|---|---|
| Klease 11 0110 | High quality finishing. Half hard film, low build up. | ||
| Klease 11 2020 | medium film, excellent release and lubricant capability | ||
| Klease 11 2030 | product overpaintable, no intermediate washing necessary | ||
| Klease 11 4000 | Excellent finishing. Soft film, low build up. | ||
| Klease 11 5000 | Half hard film, semi-glossy finishing. Suitable for very aggressive PU systems. | ||
| Klease 11 5220 | ready to use concentrate, applicable with automatic systems; semi-matt finishing, low build-up | totally solvent-free | |
| Klease 11 7000 | High quality, matt finishing. Half hard film. | ||
| Release agents for polyester mono-density unit soles and direct soling production. Products available in various concentrations and different solvent grades, depending on moulding process conditions. | |||
| Code | Properties | Notes | Data Sheet |
|---|---|---|---|
| Ecolease 11 0480 | matt finishing water-based release agent | totally solvent-free | |
| Ecolease 11 5280 | glossy finishing water-based release agent | totally solvent-free | |
| Release agents for polyester mono-density unit soles and direct soling production. | |||
| Code | Properties | Notes | Data Sheet |
|---|---|---|---|
| Klease 12 2890 | Rubber-like effect, low build up. Excellent adhesion midsole/outsole. | ||
| Klease 12 2950 | matt finishing and dry touch; excellent adhesion between outsole and midsole | ||
| Klease 12 8270 | semi-matt uniform finishing, excellent release and adhesion between outsole and midsole | ||
| Klease 12 8310 | Semi-glossy finishing, low build up. Excellent adhesion midsole/outsole. | ||
| Release agents for sport, boots and safety shoes dual-density production. Products available in various concentrations and different solvent grades, depending on moulding process conditions. | |||
| Code | Properties | Notes | Data Sheet |
|---|---|---|---|
| Klease 13 0770 | soft hand, rubber-like effect, matt finishing, high release and lubrication grade | ||
| Klease 13 2890 | matt, uniform finishing, low build-up | ||
| Release agents for sport, boots and safety shoes dual-density production. Products available in various concentrations and different solvent grades, depending on moulding process conditions. | |||
| Code | Properties | Notes | Data Sheet |
|---|---|---|---|
| Klease 14 5000 | Half hard film, semi-glossy finishing. Suitable for very aggressive PU systems. | ||
| Klease 14 0770 | Matt finishing, soft texture, extremely low mould build up | Available at different concentration and with a large variety of solvents | |
| Klease 14 4450 | ultra-matt finishing, rubber-like effect, limited build-up of the moulds | ||
| Release agents for polyether mono-density unit soles and direct soling production. Products available in various concentrations and different solvent grades, depending on moulding process conditions. | |||
| Code | Properties | Notes | Data Sheet |
|---|---|---|---|
| Klease 16 0470 | Hard film, high slipperiness. To be applied on moulds at 35-40°C. | ||
| Klease 16 0850 | hard film, excellent release with limited build-up | ||
| Klease 16 3610 | excellent release and lubrication, tin-free | ||
| Klease 16 4790 | semi-matt finishing | ||
| Release agent for insoles production. Products available in various concentrations and different solvent grades, depending on moulding process conditions. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Aqualube 21 7540 | Fatty acid salts water solution, easy to be added. High wetting power, suitable for various rubber blends. 100% biodegradable. | Antifoam use advised | |
| Aqualube 21 5650 | Water based anti-adhesive, with high percentage of mineral fillers.Suitable for rubber blends particularly sticky. | Antifoam use advised | |
| Anti-adhesives for green rubber blends production; suitable for automatic dosage. High concentration products, to be diluted gently stirring. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Klube 22 1350 | For PP,PE,NYLON,EPDM made flexible mandrels, whatever lenght. No release contamination into hoses after process. | Film resistant to abrasion and high temperature. | |
| Klube 23 1350 | for rigid mandrels, whatever length | High temperature and abrasion resisting film. No residual parts left in the hose. | |
| Klube 23 2640 | For rigid mandrels, more than 40 mt lenght. | Film resistant to abrasion and high temperature. | |
| Klube 23 2700 | For rigid mandrels, less than 40 mt lenght. | Film resistant to abrasion and high temperature. | |
| Release agents for brake and power steering hoses, industrial hoses for fluids, chemical products, gas and vapours, mineral oils and gasoline transfer. Hydraulics high pressure hoses, industrial and agricultural sectors. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Aqualube 22 1380 | product for flexible mandrels in PP, PE, NYLON, EPDM | green rubber anti-adhesive for the production of hoses on flexible mandrels | |
| Aqualube 22 2400 | For PP,PE,NYLON,EPDM made mandrels. | PDMS free. Film resistant to abrasion and high temperature. | |
| Aqualube 22 5740 | product for flexible mandrels in PP, PE, NYLON, EPDM | polymeric based release agent, for industrial hoses on flexible mandrel. High release and slide capability. No residual left. | |
| Aqualube 23 5400 | for rigid mandrels, less than 40 mt length | release agent for industrial hoses on rigid mandrel. Specific for silicone rubber | |
| Aqualube 23 5740 | for rigid mandrels, more than 40 mt length | polymeric based release agent, for industrial hoses on flexible mandrel. High release and slide capability. No residual left. | |
| Release agents for brake and power steering hoses, industrial hoses for fluids, chemical products, gas and vapours, mineral oils and gasoline transfer. Hydraulics high pressure hoses, industrial and agricultural sectors. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Aqualube 24 1100 | High resistance to thermal degradation. Excellent slippery power, suitable for items with elaborated structure. | Silicone fluids free, fully water soluble. | |
| Aqualube 24 4140 | ready to used product suitable for any kind of EPDM, VAMAC, silicone and fluorinated rubber compounds | Totally water soluble, high biodegradability | |
| Aqualube 24 5050 | High viscosity, ready-to-use, for complex shaped hoses in EPDM and VAMAC | Totally water soluble | |
| Release agents for shaped hoses production, by general/special rubber blends. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Klube 25 1130 | semipermanent release agent for Poly-V transmission belts | no release agent transfer on the molded parts | |
| Release agent for POLI-V driving belts production. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Aqualube 25 1520 | Synthetic polymers enulsion, high lubricant power and thermal stability. | To be diluted before use. Low oxidation rate, at high temperture too. | |
| Aqualube 25 5450 | for transmission belts, with teflon or aramidic weaving | high lubricant capability and low build-up | |
| Release agent for driving belts production in general. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Aqualube 26 2680 | Suitable for direct steam pan curing. | High quality finishing after process. | |
| Release agent for pan curing hoses production. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Klube 27 1750 | Semi-permanent product,excellent release properties. | Suitable for metal-rubber adhesion. | |
| Release agents for gaskets and technical moulding production. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Aqualube 27 3500 | General use, no suitable for silicone rubber. | To be diluted before use for compression moulding. | |
| Aqualube 27 2660 | Fluoropolymers emulsion, suitable also for silicone rubber. Thermal stability up to 200°C. | Silicone fluids free, suitable for metal/rubber adhesion. To be diluted before use for compression moulding. | |
| Aqualube 27 7140 | Polymers emulsion, high release and thermal stability power. | For rubber flooring and recycled rubber. | |
| Aqualube 27 3370 | Excellent release power, inert film. High thermal stability. | Multi-release properties, no transfer contamination. For compression moulding, silicone fluids free. | |
| Release agents for gaskets and technical moulding production. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Aqualube 29 1370 | Modified silicone emulsion, high lubricant and release power.. No suitable for silicone rubber. Moulding temperature 200-220°C. | High performance in compression moulding. To be diluted before use. | |
| Aqualube 29 3500 | rubber soles mould release agents | excellent release properties with low build-up. Glossy finishing | |
| Release agent for rubber shoe soles moulding. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Aqualube 28 1230 | Semi-glossy finishing, very high release power. | To be diluted before use, and applied on moulds at >50°C. Deeply clean moulded pieces before post-treatment processes. | |
| Aqualube 28 2980 | Semi-glossy finishing, very high release power. | To be diluted before use, and applied on moulds at >50°C. Deeply clean moulded pieces before post-treatment processes. | |
| Release agents for soles, midsoles and artifacts moulding. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Aqualube 31 7070 | Product suitable either for dry or liquid circuit cutting. The treatment avoids granules packing during storage, without use of powder fillers, and it reduces electrostatic charges accumulation during handling. | To be diluted before use, available in various concentrations. | |
| Anti-adhesives for TPR granules production and handling. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Aqualube 32 2670 | Excellent flowage and pieces finishing properties. | Multi-release properties. | |
| Aqualube 32 3450 | Excellent flowage and release properties. Semi-matt finishing. | Multi-release properties. | |
| Release agents for PE, PP and Nylon artifacts moulding. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Aqualube 32 2670 | Excellent flowage and pieces finishing properties. | Multi-release properties. | |
| Aqualube 32 3450 | Excellent flowage and release properties. Semi-matt finishing. | Multi-release properties. | |
| Release agents for PE, PP and Nylon artifacts moulding. | |||
| Codice | Caratteristiche | Note | Scheda tecnica |
|---|---|---|---|
| Kcast 41 1120 | Excellent antioxidant and anticorrosive properties; very high flowage and release power.General use. | To be diluited before use, up to 1 ÷ 170. | |
| Kcast 41 0230 | Excellent antioxidant and anticorrosive properties; surface micro-porosity reduction. Specific for very high quality pieces production. | To be diluited before use, up to 1 ÷ 200. | |
| Release agents for aluminum die casting. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Kharz 51 7140 | Excellent release power and low build up. | Mutli-release properties. Available in various concentrations. | |
| Release agents for door panels, sound insulation production, made by synthetic/natural fibers-reinforced phenolic resins moulding. | |||
| Codice | Caratteristiche | Note | Scheda tecnica |
|---|---|---|---|
| Kharz 52 1390 | this release agent creates an insulating film between the item and the mould, providing excellent release while protecting the mould from styrene | applicable on metal moulds, resin, plaster, etc. | |
| Kharz 52 1880 | Moulde pieces can be post-treated without cleaning. | Multi-release properties. Suitable eiher for resin or metal moulds. | |
| Kharz 52 6600 | waxy, hard and resistant film. Excellent release, low build-up | suitable for fiberglass reinforced resin, large moulds | |
| Release agents for gel-coats, filled/reinforced polyester resins moulding. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Kharz 52 8340 | Release driving by formation of a consistent and insulating film between mould and resin. | Suitable for different mould types: polyester, gypsum, metal mades. | |
| Release agents for gel-coats, filled/reinforced polyester resins moulding. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Kharz 53 0630 | waxy paste, with ultra-glossy finishing | allows multiple releases according to the mould and type of resin | |
| Kharz 53 1900 | waxy medium-hard film, with low build-up | ||
| Kharz 53 1990 | Hard and tough film, Very high release and slippery power. | Silicone based product: deeply clean moulded pieces by solvents or sandblasting, before post-treatment processes. | |
| Release agents for electronic and electrotechnical pieces moulding. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Rubber lube 61 4420 | water-based product to be applied either directly on the bladder or inside the tyre to be transfered on the bladder | allows multiple releases while increases the bladder durability over the time | |
| Products for lubricant and semi-permanent bladder treatment. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Rubber lube 62 3070 | Water based product. Very good bladder slippery and conformation into tyre, and air removal from mould. | Excellent lubricant properties and low tyres production defetcs. Available in black version also. | |
| Rubber lube 62 3970 | black version of Rubber lube 62 3070; same technical features | ||
| Internal release agents for tyres moulding. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Rubber lube 63 0300 | Water based product. Colour uniformity between tyre tread and wall, kept after aging processes. | Air removal from mould improvement, low build up. | |
| External release agents for tyres moulding. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Rubber lube 64 4490 | to be applied on manual and automatic cutting systems | decrease of rubbing forces and heat development. Silicone free | |
| Lubricant for tyres refinishing. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Rubber lube 65 3370 | Water based, semi-permanent; high lucricant power and low tyres production defects. | Inert and thermally stable film. No transfer on moulded pieces. | |
| Release agents for tyre treads moulding. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Rubber lube 66 2690 | Water based black coating, fast drying at room temperature. | Very god adhesion on tyre. Elastic, tough and uniform film. | |
| Coatings for external tyre aesthetic refinishing. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Rubber lube 68 7540 | Fatty acid salts water solution, easy to be added. High wetting power, suitable for various rubber blends. 100% biodegradable. | Antifoam use advised | |
| Rubber lube 68 5650 | Water based anti-adhesive, with high percentage of mineral fillers.Suitable for rubber blends particularly sticky. | Antifoam use advised | |
| Anti-adhesives for green rubber blends production; suitable for automatic dosage. High concentration products, to be diluted gently stirring. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Kemi 71 8600 | Non-siliconic antifoam additive for water based systems. | Stable in acid and moderate alcaline conditions. Easy water dispersible. | |
| Kemi 71 0510 | non-siliconic, foam formation reduction in several water-based applications | easily water soluble | |
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Kemi 72 0730 | suitable for cleansing encrusted moulds and metallic parts in general | suggested working temperature: 60 - 70°C | |
| Kemi 72 7170 | Specific product for moulds cleaning. | General use. | |
| Kemi 72 0020 | Specific product for moulds cleaning. | High cleaning power. | |
| Kemi 72 1450 | Suitable for release agents residuals removing from moulds and tools, as spray guns and tanks. | High cleaning power. | |
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Kemi 73 1660 | High slipperiness properties. Very clean and even surface aspect. | Ready to use. | |
| Kemi 73 2060 | High slipperiness properties. | Ready to use. | |
| Kemi 73 0360 | High slipperiness properties. | To be diluted before use. | |
| Release agents for concrete artifacts production. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Kemi 73 1660 | High slipperiness properties. Very clean and even surface aspect. | Ready to use. | |
| Kemi 73 2060 | High slipperiness properties. | Ready to use. | |
| Kemi 73 0360 | High slipperiness properties. | To be diluted before use. | |
| Release agents for concrete artifacts production. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Kemi 74 0331 | Additive suitable for conductivity increase, general use. | To be used at 2-3 % on polymer amount basis. | |
| Code | Properties | Notea | Data sheet |
|---|---|---|---|
| Kemi 75 0030 | For mixing heads, tanks and input pipes cleaning of PU moulding machineries. | High cleaning power. | |
| Kemi 75 1070 | suitable for cleansing moulds and mixing heads | suggested working temperature: 60 - 80°C | |
| Kemi 75 2300 | For mixing heads, tanks and input pipes cleaning of PU moulding machineries. | Low toxicological impact product. | |
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Kemi 76 1500 | Correctly applied, the product leaves a compact film on new or old cleaned moulds, improving folowing moulding cycles. | Brush or wiping application. | |
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Kemi 76 1500 | Correctly applied, the product leaves a compact film on new or old cleaned moulds, improving folowing moulding cycles. | Brush or wiping application. | |
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Kemi 79 0490 | Reduction of PU color variation, caused by sunbeams exposure. | Dosage depending on colour shade and light protection level required. | |
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Aqualube 81 2900 | polymeric emulsion for natural/syntethic latex matresses and pillows; reduced build-up, excellent release, good tactile-feeling surface | available for ready-to-use or concentrated solutions | |
| Aqualube 81 3030 | Water based release agent for natural/synthetic latex. Moulding process temperature about 80°C. Very low build up and greasiness. | Concentrated product, to be diluted before use. | |
| Release agents for latex mattresses and pillows production. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Kemi 78 1730 | additive for high gloss soles production | suitable for solvent-based products | |
| Kemi 78 4980 | additive employed to modify the moulded items' superficial aspect | suitable for solvent-based products | |
| Kemi 78 0960 | additive employed to modify the moulded items' superficial aspect | suitable for water-based products | |
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Ktech 91 0200 | PE/Acrylic wax, non ionic emulsion. | For floor polishing products. High gloss, anti-slip and anti-blocking effect. High scratch resistance. | |
| Ktech 91 4300 | PP/Maleic modified wax, non ionic emulsion. | For high speed floor polishing products. Anti-slip effect, high hardness. | |
| Ktech 91 5300 | HDPE wax, non ionic emulsion. | For polishes products. Scratch and staining resistance. | |
| Ktech 91 1360 | Carnauba wax, non ionic emulsion. | For floor and carbody polishes products. Impartisce proprietà Lubricant, polishing and equalizing properties. | |
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Kemi 7C 1430 | polymeric emulsion having anti-noise affection on polyurethane parts. Excellent sliding | ||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Ktech 92 0200 | PE/Acrylic wax, non ionic emulsion. | Leather treatment. High gloss, anti-slip and anti-blocking effect. High scratch resistance. | |
| Ktech 92 5100 | HDPE wax, cationic emulsion. | For inks and coatings formulations.Surface hardness and slipperiness, flip-flop effect improvement. | |
| Ktech 92 5300 | HDPE wax, non ionic emulsion. | For inks and coatings formulations. Surface scratch and friction properties improvement. In parquet flooring black heel resistance increase. | |
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Ktech 93 0200 | PE/Acrylic wax, non ionic emulsion. | Leather treatment. Conferisce brillantezza, effetto antiscivolo e anti-blocking, resistenza alla scalfittura. Trattamento pelli | |
| Ktech 93 0350 | PE wax non ionic emulsion. | Textiles treatment in general. | |
| Ktech 93 5300 | HDPE wax, non ionic emulsion. | Leather treatment. Surface properties, scratch and friction improvement. | |
| Ktech 93 1360 | Carnauba wax, non ionic emulsion. | Leather treatment. Lubricant, polishing and equalizing properties. | |
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Ktech 94 4300 | PP/Maleic modified wax, non ionic emulsion. | For die casting products. Aluminum flowage improvement, moulded pieces with high shining. | |
| Ktech 94 0350 | PE wax non ionic emulsion. | For die casting products. General use. | |
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Kchrome | Available in traditional and special carriers; wide range of compatibility and viscosity, for any application system. | Wide colour chart, Ral, Pantone and customized references.High UV and aging resistance special systems. | |