| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Klease 01 1500 | Waxy paste suitable either for room or high temperature processes. | Foam sliding improvement; very high release properties | |
| Release agent for flexible and rigid block foaming, for furniture and constructions industries. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Klease 02 1580 | semi-matt finishing. Excellent release and superficial aspect. Low build-up | direct finishing without IMC | |
| Klease 02 3800 | Semi-glossy finishing, low build up. Good pattern sharpness | Direct finishing without IMC | |
| Klease 0B 3100 | Glossy finishing, low build up. Good pattern sharpness. | Direct finishing without IMC | |
| Klease 0A 2800 | Very high mould structure sharpness, for embossed and skin effects. | To be used with IMC | |
| Klease 0B 0800 | semi-matt finishing when used without IMC. Superficial uniformity and definition, excellent release | to be used with or without IMC | |
| Klease 0B 3400 | Semi-matt finishing. Very high mould structure sharpness, for embossed and skin effects. | To be used with or without IMC | |
| Release agents for armrests, headrests, saddles, steering wheels, sport equipments production. Products available in various concentrations and different solvent grades, depending on moulding process conditions. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Ecolease 02 3580 | matt, uniform finishing. Good release and limited build-up. Totally solvent-free | to be used with or without IMC Mould temperature > 50°C | |
| Ecolease 0A 4120 | semi-matt finishing, low build-up, superficial uniformity. Totally solvent-free | to be used with or without IMC Mould temperature > 50°C | |
| Release agent for armrests, headrests, saddles, steering wheels, sport equipments production. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Klease 03 6600 | To be applied on moulds at 40-45°C. Half hard film. For MDI/TDI - TDI systems. | ||
| Klease 03 2250 | To be applied on moulds at 40-60°C. Open cells finishing . For MDI based systems. Half hard film. | ||
| Klease 03 4040 | mould temperature 45/65 °C. medium film, good release and slipperiness, low build-up | MDI e MDI/TDI systems | |
| Klease 03 4850 | mould temperature 40/50 °C. Medium, flexible film, low build-up. Superficial soft hand | MDI e MDI/TDI systems | |
| Klease 03 2160 | To be applied on moulds at 40-60°C. For MDI/TDI - TDI based systems. | Concentrated product, to be diluted with solvent. Compatible with various density foams. | |
| Klease 03 2222 | Lubricant for PU | ||
| Release agents for car and motor bike seats, headrest, armrests, padding production. Products available in various concentrations and different solvent grades, depending on moulding process conditions. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Ecolease 03 0680 | excellent release and slipperiness of the parts. Semi-closed surface, soft and dry hand. Totally solvent-free | mould temperature > 50°C. pre-treatment with KEMI 76 1500 recommended. MDI and MDI/TDI systems | |
| Ecolease 03 1780 | excellent release and slipperiness of the parts, soft hand. Totally solvent-free | mould temperature > 50°C. pre-treatment with KEMI 76 1500 recommended. MDI and MDI/TDI systems | |
| Release agents for car and motor bike seats, headrests, armrests, padding production. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Ecolease 04 1400 | High temperature oxidation fastness. To be applied on moulds at 85-100°C | Concentrated product,to be diluted at use. | |
| Ecolease 04 1430 | Anti-noise component to be used with 04 1400 | Reduction of rubbing noise between seats and inserts. | |
| Release agent for car seats production. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Klease 05 1020 | product for high density and for RIM/RRIM. Medium film, good definition of the surface. Glossy finishing | pickling necessary for overpainting | |
| Klease 05 0310 | product for high density and for RIM/RRIM. Medium film, good definition of the surface. Glossy finishing | pickling necessary for overpainting | |
| Klease 0D 1000 | waxy paste to be applied with a cloth or brush. For rigid low/medium density | silicone-free product | |
| Klease 0C 5030 | For low density foams. Soft film, low build up. | Silicone free | |
| Klease 0C 6900 | medium waxy film, for medium/low density. Excellent release, good surface definition | silicone-free product | |
| Release agents for sandwich panels, funeral wreaths, insulation, woodgrain, car spoilers, bumpers and interior doors, high structural strength parts. Products available in various concentrations and different solvent grades, depending on moulding process conditions. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Ecolease 0C 2960 | Totally solvent-free syntetic polymers emulsion, excellent release, suitable for medium/low density. | mould temperature > 50 °C | |
| Release agents for sandwich panels, funeral wreaths, insulation, woodgrain, car spoilers, bumpers and interior doors, high structural strength parts. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Klease 06 3310 | Soft film, high slipperiness. | ||
| Release agents for dashboards, schock absorbers, car under-carpets, sound insulation productions. Products available in various concentartions and different solvent grades, depending on moulding process conditions. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Ecolease 06 3270 | Soft film, good slipperiness. | To be applied on moulds at temperature > 50°C. | |
| Release agents for dashboards, schock absorbers, car under-carpets, sound insulation productions. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Klease 07 1020 | Glossy finishing. Half hard, slippery and protective film. | ||
| Klease 07 2000 | Glossy finishing. Soft film, high temperature resistance. | ||
| Release agents for cart wheels, rollers, sheets production. Products available in various concentrations and different solvent grades, depending on moulding process conditions. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Ecolease 07 2620 | Glossy finishing, hard film. Low build up and high slipperiness. | To be applied on moulds at temperature > 50°C. | |
| Release agents for cart wheels, rollers, sheets production. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Klease 08 1500 | waxy paste to be applied with a cloth or brush. Medium film with excellent extraction and release capabilities | mould temperature 40/45 °C. MDI e MDI/TDI systems | |
| Klease 08 6600 | To be applied on moulds at 40-45°C. Half hard film. For MDI/TDI - TDI systems. | ||
| Release agent for pillows, mattresses, padding production. Products available in various concentrations and different solvent grades, depending on moulding process conditions. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Ecolease 08 0280 | emulsion of synthetic polymers; high release and slipperiness, dry hand | mould temperature > 50°C. MDI e MDI/TDI systems | |
| Ecolease 08 2960 | High slipperiness and low build up. For MDI/TDI - TDI systems. | To be applied on moulds at temperature > 50°C. | |
| Release agent for pillows, mattresses, padding production. | |||
| Code | Properties | Notes | Data Sheet |
|---|---|---|---|
| Klease 09 2770 | Per blown systems. Semi-matt finishing. | ||
| Klease 09 1530 | for compact systems. Glossy finishing. | ||
| Release agents for automotive filters production. Products available in various concentrations and different solvent grades, depending on moulding process conditions. | |||
| Code | Properties | Notes | Data sheet |
|---|---|---|---|
| Kemi 76 1500 | Correctly applied, the product leaves a compact film on new or old cleaned moulds, improving folowing moulding cycles. | Brush or wiping application. | |