Comfort and Mattresses

Products

Cold Cure Flexible Foams

Solvent Based

Cold Cure Flexible Foams
CodePropertiesNotesData sheet
Klease 03 6600To be applied on moulds at 40-45°C. Half hard film. For MDI/TDI - TDI systems.
Klease 03 2250 To be applied on moulds at 40-60°C. Open cells finishing . For MDI based systems. Half hard film.
Klease 03 4040mould temperature 45/65 °C. medium film, good release and slipperiness, low build-upMDI e MDI/TDI systems
Klease 03 4850mould temperature 40/50 °C. Medium, flexible film, low build-up. Superficial soft handMDI e MDI/TDI systems
Klease 03 2160To be applied on moulds at 40-60°C. For MDI/TDI - TDI based systems.Concentrated product, to be diluted with solvent. Compatible with various density foams.
Klease 03 2222Lubricant for PU
Release agents for car and motor bike seats, headrest, armrests, padding production. Products available in various concentrations and different solvent grades, depending on moulding process conditions.

Water Based

Cold Cure Flexible Foams
CodePropertiesNotesData sheet
Ecolease 03 0680excellent release and slipperiness of the parts. Semi-closed surface, soft and dry hand. Totally solvent-freemould temperature > 50°C. pre-treatment with KEMI 76 1500 recommended. MDI and MDI/TDI systems
Ecolease 03 1780excellent release and slipperiness of the parts, soft hand. Totally solvent-freemould temperature > 50°C. pre-treatment with KEMI 76 1500 recommended. MDI and MDI/TDI systems
Release agents for car and motor bike seats, headrests, armrests, padding production.

Viscoelastic Foams

Solvent Based

Viscoelastic Foams
CodePropertiesNotesData sheet
Klease 08 1500waxy paste to be applied with a cloth or brush. Medium film with excellent extraction and release capabilitiesmould temperature 40/45 °C. MDI e MDI/TDI systems
Klease 08 6600To be applied on moulds at 40-45°C. Half hard film. For MDI/TDI - TDI systems.
Release agent for pillows, mattresses, padding production. Products available in various concentrations and different solvent grades, depending on moulding process conditions.

Water Based

Viscoelastic Foams
CodePropertiesNotesData sheet
Ecolease 08 0280emulsion of synthetic polymers; high release and slipperiness, dry handmould temperature > 50°C. MDI e MDI/TDI systems
Ecolease 08 2960 High slipperiness and low build up. For MDI/TDI - TDI systems.To be applied on moulds at temperature > 50°C.
Release agent for pillows, mattresses, padding production.

Antifoams

Water Based

Antifoams
CodePropertiesNotesData sheet
Kemi 71 8600Non-siliconic antifoam additive for water based systems.Stable in acid and moderate alcaline conditions. Easy water dispersible.
Kemi 71 0510non-siliconic, foam formation reduction in several water-based applications easily water soluble

Mould Cleaners

Solvent Based

Mould Cleaners
CodePropertiesNotesData sheet
Kemi 72 0730suitable for cleansing encrusted moulds and metallic parts in generalsuggested working temperature: 60 - 70°C
Kemi 72 7170Specific product for moulds cleaning.General use.
Kemi 72 0020Specific product for moulds cleaning.High cleaning power.
Kemi 72 1450Suitable for release agents residuals removing from moulds and tools, as spray guns and tanks.High cleaning power.

Antistatics

Antistatics
CodePropertiesNotesData sheet
Kemi 74 0331Additive suitable for conductivity increase, general use. To be used at 2-3 % on polymer amount basis.

Mixing Heads Cleaners

Solvent Based

Mixing Heads Cleaners
CodePropertiesNoteaData sheet
Kemi 75 0030For mixing heads, tanks and input pipes cleaning of PU moulding machineries.High cleaning power.
Kemi 75 1070 suitable for cleansing moulds and mixing headssuggested working temperature: 60 - 80°C
Kemi 75 2300For mixing heads, tanks and input pipes cleaning of PU moulding machineries.Low toxicological impact product.

Moulds Pre-Treatment Pastes

Solvent Based

Moulds Pre-Treatment Pastes
CodePropertiesNotesData sheet
Kemi 76 1500Correctly applied, the product leaves a compact film on new or old cleaned moulds, improving folowing moulding cycles.Brush or wiping application.

Latex – Pillows and Mattresses

Water Based

Latex - Pillows and Mattresses
CodePropertiesNotesData sheet
Aqualube 81 2900polymeric emulsion for natural/syntethic latex matresses and pillows; reduced build-up, excellent release, good tactile-feeling surfaceavailable for ready-to-use or concentrated solutions
Aqualube 81 3030Water based release agent for natural/synthetic latex. Moulding process temperature about 80°C. Very low build up and greasiness.Concentrated product, to be diluted before use.
Release agents for latex mattresses and pillows production.

Liquid Colour Pastes

Liquid Colour Pastes
CodePropertiesNotesData sheet
KchromeAvailable in traditional and special carriers; wide range of compatibility and viscosity, for any application system.Wide colour chart, Ral, Pantone and customized references.High UV and aging resistance special systems.