Household Appliances

Products

Rigid – RIM / RRIM Foams

Solvent Based

Rigid - RIM / RRIM Foams
CodePropertiesNotesData sheet
Klease 05 1020product for high density and for RIM/RRIM. Medium film, good definition of the surface. Glossy finishingpickling necessary for overpainting
Klease 05 0310product for high density and for RIM/RRIM. Medium film, good definition of the surface. Glossy finishingpickling necessary for overpainting
Klease 0D 1000waxy paste to be applied with a cloth or brush. For rigid low/medium densitysilicone-free product
Klease 0C 5030For low density foams. Soft film, low build up. Silicone free
Klease 0C 6900medium waxy film, for medium/low density. Excellent release, good surface definitionsilicone-free product
Release agents for sandwich panels, funeral wreaths, insulation, woodgrain, car spoilers, bumpers and interior doors, high structural strength parts. Products available in various concentrations and different solvent grades, depending on moulding process conditions.

Water Based

Rigid - RIM / RRIM Foams
CodePropertiesNotesData sheet
Ecolease 0C 2960Totally solvent-free syntetic polymers emulsion, excellent release, suitable for medium/low density.mould temperature > 50 °C
Release agents for sandwich panels, funeral wreaths, insulation, woodgrain, car spoilers, bumpers and interior doors, high structural strength parts.

Shaped Hoses

Water Based

Shaped Hoses
CodePropertiesNotesData sheet
Aqualube 24 1100High resistance to thermal degradation. Excellent slippery power, suitable for items with elaborated structure. Silicone fluids free, fully water soluble.
Aqualube 24 4140ready to used product suitable for any kind of EPDM, VAMAC, silicone and fluorinated rubber compoundsTotally water soluble, high biodegradability
Aqualube 24 5050High viscosity, ready-to-use, for complex shaped hoses in EPDM and VAMACTotally water soluble
Release agents for shaped hoses production, by general/special rubber blends.

O-Ring and Technical Moulding

Solvent Based

O-Ring and Technical Moulding
CodePropertiesNotesData sheet
Klube 27 1750Semi-permanent product,excellent release properties.Suitable for metal-rubber adhesion.
Release agents for gaskets and technical moulding production.

Water Based

O-Ring and Technical Moulding
CodePropertiesNotesData sheet
Aqualube 27 3500 General use, no suitable for silicone rubber. To be diluted before use for compression moulding.
Aqualube 27 2660Fluoropolymers emulsion, suitable also for silicone rubber. Thermal stability up to 200°C.Silicone fluids free, suitable for metal/rubber adhesion. To be diluted before use for compression moulding.
Aqualube 27 7140Polymers emulsion, high release and thermal stability power. For rubber flooring and recycled rubber.
Aqualube 27 3370Excellent release power, inert film. High thermal stability. Multi-release properties, no transfer contamination. For compression moulding, silicone fluids free.
Release agents for gaskets and technical moulding production.

Die Casting

Water Based

Die Casting
CodiceCaratteristicheNoteScheda tecnica
Kcast 41 1120Excellent antioxidant and anticorrosive properties; very high flowage and release power.General use. To be diluited before use, up to 1 ÷ 170.
Kcast 41 0230Excellent antioxidant and anticorrosive properties; surface micro-porosity reduction. Specific for very high quality pieces production.To be diluited before use, up to 1 ÷ 200.
Release agents for aluminum die casting.

Phenolics

Solvent Based

Phenolics
CodePropertiesNotesData sheet
Kharz 51 7140 Excellent release power and low build up.Mutli-release properties. Available in various concentrations.
Release agents for door panels, sound insulation production, made by synthetic/natural fibers-reinforced phenolic resins moulding.

Antifoams

Water Based

Antifoams
CodePropertiesNotesData sheet
Kemi 71 8600Non-siliconic antifoam additive for water based systems.Stable in acid and moderate alcaline conditions. Easy water dispersible.
Kemi 71 0510non-siliconic, foam formation reduction in several water-based applications easily water soluble

Mould Cleaners

Solvent Based

Mould Cleaners
CodePropertiesNotesData sheet
Kemi 72 0730suitable for cleansing encrusted moulds and metallic parts in generalsuggested working temperature: 60 - 70°C
Kemi 72 7170Specific product for moulds cleaning.General use.
Kemi 72 0020Specific product for moulds cleaning.High cleaning power.
Kemi 72 1450Suitable for release agents residuals removing from moulds and tools, as spray guns and tanks.High cleaning power.

Antistatics

Antistatics
CodePropertiesNotesData sheet
Kemi 74 0331Additive suitable for conductivity increase, general use. To be used at 2-3 % on polymer amount basis.

Mixing Heads Cleaners

Solvent Based

Mixing Heads Cleaners
CodePropertiesNoteaData sheet
Kemi 75 0030For mixing heads, tanks and input pipes cleaning of PU moulding machineries.High cleaning power.
Kemi 75 1070 suitable for cleansing moulds and mixing headssuggested working temperature: 60 - 80°C
Kemi 75 2300For mixing heads, tanks and input pipes cleaning of PU moulding machineries.Low toxicological impact product.

Moulds Pre-Treatment Pastes

Solvent Based

Moulds Pre-Treatment Pastes
CodePropertiesNotesData sheet
Kemi 76 1500Correctly applied, the product leaves a compact film on new or old cleaned moulds, improving folowing moulding cycles.Brush or wiping application.

UV Filters

UV Filters
CodePropertiesNotesData sheet
Kemi 79 0490Reduction of PU color variation, caused by sunbeams exposure. Dosage depending on colour shade and light protection level required.

Liquid Colour Pastes

Liquid Colour Pastes
CodePropertiesNotesData sheet
KchromeAvailable in traditional and special carriers; wide range of compatibility and viscosity, for any application system.Wide colour chart, Ral, Pantone and customized references.High UV and aging resistance special systems.