|
|
|
|
|
Kemi’s products bearing the ECOLEASE brand, an exclusive trademark protected and registered at the world-wide level, have now been on the market for more than 10 years.
All ECOLEASE products are based on aqueous emulsions containing absolutely no organic solvents.
Within the vast range of ECOLEASE products, all customers are sure to find the one they need to satisfy their production requirements, in full compliance with the relevant regulations on atmospheric VOC emissions.
Today ECOLEASE is famous world-wide as signifying reliability and quality in water-based release technology.
|
| |
ECOLEASE™ 2256 |
|
Base: Water
Properties: General purpose release agent for MDI systems, Excellent release power and very limited build-up. Soft film.
Application: Cold Cure Flexible foam
|
|
|
| |
ECOLEASE™ 226/2 |
|
|
Base: Water
Properties: General purpose relase agent, with a good release effect and quite dry finish. High-solids content, with a medium-hard film.
Application: Cold Cure Flexible foam
|
|
|
| |
STD 41 |
|
|
Base: Water
Properties: Concentrate product to be diluted before use. High resistance to oxydation; low build-up.
Application: Hot Cure Flexible Foam
|
|
|
| |
W 1436 |
|
|
Base: Water
Properties: Anti-noise additive to be used with the our release agent STD 41.
Application: Hot Cure Flexible Foam
|
|
|
| |
WR 1797 |
|
|
Base: Water
Properties: general purpose reale agent specific for spray application. High-solids with a soft film, ensures a good release effect and low build-up.
Application: Rigid Foams
|
|
|
| |
W 416 R |
|
|
Base: Water
Properties: "No tranfer product". Suitable for all rubber compounds.
Application: Rubber Soles
|
|
|
| |
WI 1028 |
|
|
Base: Water
Properties: General purpose release agent with a semi-glossy finish. High solids content allows a very reduced consumption. Appropriate also for car filters assembled with non expanded foams.
Application: Integral Skin Foam
|
|
|
| |
ECOLEASE™ 2494 |
|
|
Base: Water
Properties: High-solids release agent for reactive MDI PU systems. Very good release power. Medium-soft film.
Application: Cold Cure Flexible foam
|
|
|
| |
WI 1029 |
|
|
Base: Water
Properties: Specific product for technical parts that require a semi-matt finish.
High solids content allows a reduced consumption and very low build up on the moulds.
Application: Integral Skin Foam
|
|
|
| |
RWE 1001 |
|
|
Base: Water
Properties: Liquid water base wax product for mould treatment. To be used on new or just cleaned tools to enhance start-up performance of the release agents. For spray ot wipe application.
Application: Cleaners & Sealers
|
|
|
| |
ECOLEASE™ W 558 |
|
|
Base: Water
Properties: Release agent for low & medium density foams. It forms a medium hard film with very good release properties, giving a dry finish to the parts. For spray and wipe application.
Application: Rigid Foams
|
|
|
| |
WR 2002 |
|
|
Base: Water
Properties: This release agent for LD insulating foams, with specific tixotropic features for the application on vertical tools. Its high-solids content and very soft film ensure outstanding release coupled with low build-up. For spray, wipe or brush application.
Application: Rigid Foams
|
|
|
| |
WS 520 |
|
|
Base: Water
Properties: Water base semi-concentrate silicon based release agent for parts with a glossy finish.
High heat resistance. For brush and spray application. Dilutable.
Application: PU Elastomer
|
|
|
| |
GS 603 |
|
|
Base: Water
Properties: Ready for use SILICON FREE water base release agent with dry finish.
Good release properties and excellent heat resistance.
Application: PU Elastomer
|
|
|
| |
FI 0813 |
|
|
Base: Solvent
Properties: Low solids release agent for MDI & TDI systems and blends, with very good release properties and build-up extremely reduced. Medium hard film, suitable for medium-low temperatures of the moulds.
Application: Cold Cure Flexible foam
|
|
|
| |
FKC 1505 |
|
|
Base: Solvent
Properties: High solids release agent for medium-low temperatures with excellent release properties and reduced consumption. Also low solids version available.
Application: Cold Cure Flexible foam
|
|
|
^ torna su
| |
Ecolease™ GT 13 |
|
|
Base: Water
Properties: Release agent for flexible mandrels. Suitable for all kind of material
(Nylon;PP;PE;EPDM). Patented system of application KEMI MTM is available upon request.
For further details see under the voice "EQUIPMENTS".
Applicazione: Reinforced Hoses
|
|
|
| |
ECOLEASE™ G 577 |
|
|
Base: Water
Properties: Semipermanent product. Suggetsed for the treatment of nylon wrap tape. Also suitable for rigid mandrel treatment.
Applicazione: Reinforced Hoses
|
|
|
| |
Ecolease™ DGE 35 |
|
|
Base: Water
Properties: Silicon emulsion for the treatment of nylon bandages.
Applicazione: Reinforced Hoses
|
|
|
| |
Ecolease™ STZ |
|
|
Base: Water
Properties: High-stability dispersion of zinc stearate. Best performance over all kind of compounds.
Applicazione: Reinforced Hoses
|
|
|
| |
Ecolease™ G 331 |
|
|
Base: Water
Properties: Excellent release. Suitable for all rubber compounds. Easily washable in cold water and completely biodegradable.
Note: for VAMAC it is necessary to add 5-7% of our additive EMC 1547.
Applicazione: Shaped Hoses
|
|
|
| |
ECOLEASE™ GM 152 H |
|
|
Base: Water
Properties: Release agent for the production of pre-formed hoses.
Applicazione: Reinforced Hoses
|
|
|
| |
ECOLEASE™ DGE 25 |
|
|
Base: Water
Properties: Traditional silicon emulsion for moulding presses.
Applicazione: Transmission And Conveyor Belting
|
|
|
| |
ECOLEASE™ DGE 35 |
|
|
Base: Water
Properties: Traditional silicon emulsion for rubber moulding.
Applicazione: Compression, Injection And Transfer Moulded Rubber
|
|
|
| |
ECOLEASE™ W 1220 |
|
|
Base: Water
Properties: Concentrate emulsion for the moulding of latex foams (pillows, matresses, etc.) to be diluted before use. Good slippery effect and low build-up on the moulds. Moulded parts present a silky effect appreciated by the end user.
Applicazione: Latex Moulded Foams
|
|
|
| |
ECOLEASE™ W 614 |
|
|
Base: Water
Properties: Concentrate emulsion for the moulding of synthetic and natural latex foams or their blends, produced with a discontinuous process. The product needs to be diluted before use. Good slippery effect.
Applicazione: Latex Moulded Foams
|
|
|
| |
ECOLEASE™ WD 306 |
|
|
Base: Water
Properties: This ready to use release agent allows a significant reduction of the oxydation occurring during the industrial process of latex foams moulding. Slippery effect is very good.
Applicazione: Latex Moulded Foams
|
|
|
| |
ECOLEASE™ W 416 R |
|
|
Base: Water
Properties: "No-Transfer" product. Suitable for moulding of rubber to metal bonded parts.
Applicazione: Moulding Of Technical Articles
|
|
|
| |
ECOLEASE™ TP 707 |
|
|
Base: Water
Properties: Easily washable with just cold water and completely biodegradable.
Of the same product Kemi offers the FOOD GRADED version.
Applicazione: Liquid Anti-tacks For Rubber Compounds
|
|
|
| |
ECOLEASE™ SBC 07 |
|
|
Base: Water
Properties: This is the FOOD GRADED version of Kemi renewed anti-tacking agent. Granules are completely washable with cold water and waste waters result highly biodegradable. The build-up of static charges is completely eliminated.
Applicazione: Liquid Anti-tacks For Rubber Compounds
|
|
|
| |
ECOLEASE™ G 66 |
|
|
Base: Water
Properties: High-tech waterbased product for steel mandrel treatment. It creates a tenacious film able to ensure multiple releases.
Applicazione: Transmission And Conveyor Belting
|
|
|
| |
ECOLEASE™ BO 754 |
|
|
Base: Water
Properties: Liquid concentrate. Easily dilutable in water, it does not request the use of a stirrer during usage. Wettability is excellent on evert kind of rubber compound.
Applicazione: Batch Off
|
|
|
^ torna su
|
|
|
Kemi
MENU
Kemi SERIE ECOLEASE
